Chapter 9. Language Structure

Table of Contents

9.1. Literal Values
9.1.1. Strings
9.1.2. Numbers
9.1.3. Hexadecimal Values
9.1.4. Boolean Values
9.1.5. Bit-Field Values
9.1.6. NULL Values
9.2. Database, Table, Index, Column, and Alias Names
9.2.1. Identifier Qualifiers
9.2.2. Identifier Case Sensitivity
9.3. User-Defined Variables
9.4. Comment Syntax
9.5. Treatment of Reserved Words in MySQL

This chapter discusses the rules for writing the following elements of SQL statements when using MySQL:

9.1. Literal Values

This section describes how to write literal values in MySQL. These include strings, numbers, hexadecimal values, boolean values, and NULL. The section also covers the various nuances and “gotchas” that you may run into when dealing with these basic types in MySQL.

9.1.1. Strings

A string is a sequence of bytes or characters, enclosed within either single quote (‘'’) or double quote (‘"’) characters. Examples:

'a string'
"another string"

If the ANSI_QUOTES SQL mode is enabled, string literals can be quoted only within single quotes because a string quoted within double quotes is interpreted as an identifier.

A binary string is a string of bytes that has no character set or collation. A non-binary string is a string of characters that has a character set and collation. For both types of strings, comparisons are based on the numeric values of the string unit. For binary strings, the unit is the byte. For non-binary strings the unit is the character and some character sets allow multi-byte characters. Character value ordering is a function of the string collation.

String literals may have an optional character set introducer and COLLATE clause:

[_charset_name]'string' [COLLATE collation_name]


SELECT _latin1'string';
SELECT _latin1'string' COLLATE latin1_danish_ci;

For more information about these forms of string syntax, see Section 10.3.5, “Character String Literal Character Set and Collation”.

Within a string, certain sequences have special meaning. Each of these sequences begins with a backslash (‘\’), known as the escape character. MySQL recognizes the following escape sequences:

\0 An ASCII 0 (NUL) character.
\' A single quote (‘'’) character.
\" A double quote (‘"’) character.
\b A backspace character.
\n A newline (linefeed) character.
\r A carriage return character.
\t A tab character.
\Z ASCII 26 (Control-Z). See note following the table.
\\ A backslash (‘\’) character.
\% A ‘%’ character. See note following the table.
\_ A ‘_’ character. See note following the table.

For all other escape sequences, backslash is ignored. That is, the escaped character is interpreted as if it was not escaped. For example, ‘\x’ is just ‘x’.

These sequences are case sensitive. For example, ‘\b’ is interpreted as a backspace, but ‘\B’ is interpreted as ‘B’.

The ASCII 26 character can be encoded as ‘\Z’ to enable you to work around the problem that ASCII 26 stands for END-OF-FILE on Windows. ASCII 26 within a file causes problems if you try to use mysql db_name < file_name.

The ‘\%’ and ‘\_’ sequences are used to search for literal instances of ‘%’ and ‘_’ in pattern-matching contexts where they would otherwise be interpreted as wildcard characters. See the description of the LIKE operator in Section 12.3.1, “String Comparison Functions”. If you use ‘\%’ or ‘\_’ in non-pattern-matching contexts, they evaluate to the strings ‘\%’ and ‘\_’, not to ‘%’ and ‘_’.

There are several ways to include quote characters within a string:

  • A ‘'’ inside a string quoted with ‘'’ may be written as ‘''’.

  • A ‘"’ inside a string quoted with ‘"’ may be written as ‘""’.

  • Precede the quote character by an escape character (‘\’).

  • A ‘'’ inside a string quoted with ‘"’ needs no special treatment and need not be doubled or escaped. In the same way, ‘"’ inside a string quoted with ‘'’ needs no special treatment.

The following SELECT statements demonstrate how quoting and escaping work:

mysql> SELECT 'hello', '"hello"', '""hello""', 'hel''lo', '\'hello';
| hello | "hello" | ""hello"" | hel'lo | 'hello |

mysql> SELECT "hello", "'hello'", "''hello''", "hel""lo", "\"hello";
| hello | 'hello' | ''hello'' | hel"lo | "hello |

mysql> SELECT 'This\nIs\nFour\nLines';
| This
Lines |

mysql> SELECT 'disappearing\ backslash';
| disappearing backslash |

If you want to insert binary data into a string column (such as a BLOB column), the following characters must be represented by escape sequences:

NULNUL byte (ASCII 0). Represent this character by ‘\0’ (a backslash followed by an ASCII ‘0’ character).
\Backslash (ASCII 92). Represent this character by ‘\\’.
'Single quote (ASCII 39). Represent this character by ‘\'’.
"Double quote (ASCII 34). Represent this character by ‘\"’.

When writing application programs, any string that might contain any of these special characters must be properly escaped before the string is used as a data value in an SQL statement that is sent to the MySQL server. You can do this in two ways:

  • Process the string with a function that escapes the special characters. In a C program, you can use the mysql_real_escape_string() C API function to escape characters. See Section, “mysql_real_escape_string(). The Perl DBI interface provides a quote method to convert special characters to the proper escape sequences. See Section 22.4, “MySQL Perl API”. Other language interfaces may provide a similar capability.

  • As an alternative to explicitly escaping special characters, many MySQL APIs provide a placeholder capability that enables you to insert special markers into a statement string, and then bind data values to them when you issue the statement. In this case, the API takes care of escaping special characters in the values for you.

9.1.2. Numbers

Integers are represented as a sequence of digits. Floats use ‘.’ as a decimal separator. Either type of number may be preceded by ‘-’ or ‘+’ to indicate a negative or positive value, respectively

Examples of valid integers:


Examples of valid floating-point numbers:


An integer may be used in a floating-point context; it is interpreted as the equivalent floating-point number.

9.1.3. Hexadecimal Values

MySQL supports hexadecimal values. In numeric contexts, these act like integers (64-bit precision). In string contexts, these act like binary strings, where each pair of hex digits is converted to a character:

mysql> SELECT x'4D7953514C';
        -> 'MySQL'
mysql> SELECT 0xa+0;
        -> 10
mysql> SELECT 0x5061756c;
        -> 'Paul'

The default type of a hexadecimal value is a string. If you want to ensure that the value is treated as a number, you can use CAST(... AS UNSIGNED):

mysql> SELECT 0x41, CAST(0x41 AS UNSIGNED);
        -> 'A', 65

The x'hexstring' syntax is based on standard SQL. The 0x syntax is based on ODBC. Hexadecimal strings are often used by ODBC to supply values for BLOB columns.

You can convert a string or a number to a string in hexadecimal format with the HEX() function:

mysql> SELECT HEX('cat');
        -> '636174'
mysql> SELECT 0x636174;
        -> 'cat'

9.1.4. Boolean Values

The constants TRUE and FALSE evaluate to 1 and 0, respectively. The constant names can be written in any lettercase.

mysql> SELECT TRUE, true, FALSE, false;
        -> 1, 1, 0, 0

9.1.5. Bit-Field Values

Beginning with MySQL 5.0.3, bit-field values can be written using b'value' notation. value is a binary value written using zeroes and ones.

Bit-field notation is convenient for specifying values to be assigned to BIT columns:

mysql> CREATE TABLE t (b BIT(8));
mysql> INSERT INTO t SET b = b'11111111';
mysql> INSERT INTO t SET b = b'1010';
| b+0  | BIN(b+0) | OCT(b+0) | HEX(b+0) |
|  255 | 11111111 | 377      | FF       |
|   10 | 1010     | 12       | A        |

9.1.6. NULL Values

The NULL value means “no data.NULL can be written in any lettercase.

Be aware that the NULL value is different from values such as 0 for numeric types or the empty string for string types. See Section A.5.3, “Problems with NULL Values”.

For text file import or export operations performed with LOAD DATA INFILE or SELECT ... INTO OUTFILE, NULL is represented by the \N sequence. See Section 13.2.5, “LOAD DATA INFILE Syntax”.

9.2. Database, Table, Index, Column, and Alias Names

Database, table, index, column, and alias names are identifiers. This section describes the allowable syntax for identifiers in MySQL.

The following table describes the maximum length and allowable characters for each type of identifier.

IdentifierMaximum Length (bytes)Allowed Characters
Database64Any character that is allowed in a directory name, except ‘/’, ‘\’, or ‘.
Table64Any character that is allowed in a filename, except ‘/’, ‘\’, or ‘.
Column64All characters
Index64All characters
Alias255All characters

In addition to the restrictions noted in the table, no identifier can contain ASCII 0 or a byte with a value of 255. Database, table, and column names should not end with space characters. The use of identifier quote characters in identifiers is permitted, although it is best to avoid doing so if possible.

Identifiers are stored using Unicode (UTF-8). This applies to identifiers in table definitions that stored in .frm files and to identifiers stored in the grant tables in the mysql database. The sizes of the string columns in the grant tables (and in any other tables) in MySQL 5.0 are given as number of characters. This means that (unlike some earlier versions of MySQL) you can use multi-byte characters without reducing the number of characters allowed for values stored in these columns.

An identifier may be quoted or unquoted. If an identifier is a reserved word or contains special characters, you must quote it whenever you refer to it. (Exception: A word that follows a period in a qualified name must be an identifier, so it is not necessary to quote it, even if it is a reserved word.) For a list of reserved words, see Section 9.5, “Treatment of Reserved Words in MySQL”. Special characters are those outside the set of alphanumeric characters from the current character set, ‘_’, and ‘$’.

The identifier quote character is the backtick (‘`’):

mysql> SELECT * FROM `select` WHERE `select`.id > 100;

If the ANSI_QUOTES SQL mode is enabled, it is also allowable to quote identifiers within double quotes:

mysql> CREATE TABLE "test" (col INT);
ERROR 1064: You have an error in your SQL syntax. (...)
mysql> SET sql_mode='ANSI_QUOTES';
mysql> CREATE TABLE "test" (col INT);
Query OK, 0 rows affected (0.00 sec)

Note: Because ANSI_QUOTES causes the server to interpret double-quoted strings as identifiers, string literals must be enclosed within single quotes. They cannot be enclosed within double quotes when ANSI_QUOTES is enabled.

The server SQL mode is controlled as described in Section 5.2.5, “The Server SQL Mode”.

Identifier quote characters can be included within an identifier if you quote the identifier. If the character to be included within the identifier is the same as that used to quote the identifier itself, then you need to double the character. The following statement creates a table named a`b that contains a column named c"d:

mysql> CREATE TABLE `a``b` (`c"d` INT);

It is recommended that you do not use names of the form Me or MeN, such as 1e or 2e2, because an expression such as 1e+3 is ambiguous. Depending on context, it might be interpreted as the expression 1e + 3 or as the number 1e+3.

Be careful when using MD5() to produce table names because it can produce names in illegal or ambiguous formats such as those just described.

9.2.1. Identifier Qualifiers

MySQL allows names that consist of a single identifier or multiple identifiers. The components of a multiple-part name should be separated by period (‘.’) characters. The initial parts of a multiple-part name act as qualifiers that affect the context within which the final identifier is interpreted.

In MySQL you can refer to a column using any of the following forms:

Column ReferenceMeaning
col_nameThe column col_name from whichever table used in the statement contains a column of that name.
tbl_name.col_nameThe column col_name from table tbl_name of the default database.
db_name.tbl_name.col_nameThe column col_name from table tbl_name of the database db_name.

If any components of a multiple-part name require quoting, quote them individually rather than quoting the name as a whole. For example, write `my-table`.`my-column`, not ``.

You need not specify a tbl_name or db_name.tbl_name prefix for a column reference in a statement unless the reference would be ambiguous. Suppose that tables t1 and t2 each contain a column c, and you retrieve c in a SELECT statement that uses both t1 and t2. In this case, c is ambiguous because it is not unique among the tables used in the statement. You must qualify it with a table name as t1.c or t2.c to indicate which table you mean. Similarly, to retrieve from a table t in database db1 and from a table t in database db2 in the same statement, you must refer to columns in those tables as db1.t.col_name and db2.t.col_name.

A word that follows a period in a qualified name must be an identifier, so it is not necessary to quote it, even if it is a reserved word.

The syntax .tbl_name means the table tbl_name in the default database. This syntax is accepted for ODBC compatibility because some ODBC programs prefix table names with a ‘.’ character.

9.2.2. Identifier Case Sensitivity

In MySQL, databases correspond to directories within the data directory. Each table within a database corresponds to at least one file within the database directory (and possibly more, depending on the storage engine). Consequently, the case sensitivity of the underlying operating system determines the case sensitivity of database and table names. This means database and table names are case sensitive in most varieties of Unix, and not case sensitive in Windows. One notable exception is Mac OS X, which is Unix-based but uses a default filesystem type (HFS+) that is not case sensitive. However, Mac OS X also supports UFS volumes, which are case sensitive just as on any Unix. See Section 1.9.4, “MySQL Extensions to Standard SQL”. The lower_case_table_names system variable also affects how the server handles identifier case sensitivity, as described later in this section.

Note: Although database and table names are not case sensitive on some platforms, you should not refer to a given database or table using different cases within the same statement. The following statement would not work because it refers to a table both as my_table and as MY_TABLE:

mysql> SELECT * FROM my_table WHERE MY_TABLE.col=1;

Column, index, stored routine, and trigger names are not case sensitive on any platform, nor are column aliases.

By default, table aliases are case sensitive on Unix, but not so on Windows or Mac OS X. The following statement would not work on Unix, because it refers to the alias both as a and as A:

mysql> SELECT col_name FROM tbl_name AS a
    -> WHERE a.col_name = 1 OR A.col_name = 2;

However, this same statement is permitted on Windows. To avoid problems caused by such differences, it is best to adopt a consistent convention, such as always creating and referring to databases and tables using lowercase names. This convention is recommended for maximum portability and ease of use.

How table and database names are stored on disk and used in MySQL is affected by the lower_case_table_names system variable, which you can set when starting mysqld. lower_case_table_names can take the values shown in the following table. On Unix, the default value of lower_case_table_names is 0. On Windows the default value is 1. On Mac OS X, the default value is 2.

0Table and database names are stored on disk using the lettercase specified in the CREATE TABLE or CREATE DATABASE statement. Name comparisons are case sensitive. Note that if you force this variable to 0 with --lower-case-table-names=0 on a case-insensitive filesystem and access MyISAM tablenames using different lettercases, index corruption may result.
1Table names are stored in lowercase on disk and name comparisons are not case sensitive. MySQL converts all table names to lowercase on storage and lookup. This behavior also applies to database names and table aliases.
2Table and database names are stored on disk using the lettercase specified in the CREATE TABLE or CREATE DATABASE statement, but MySQL converts them to lowercase on lookup. Name comparisons are not case sensitive. Note: This works only on filesystems that are not case sensitive! InnoDB table names are stored in lowercase, as for lower_case_table_names=1.

If you are using MySQL on only one platform, you don't normally have to change the lower_case_table_names variable. However, you may encounter difficulties if you want to transfer tables between platforms that differ in filesystem case sensitivity. For example, on Unix, you can have two different tables named my_table and MY_TABLE, but on Windows these two names are considered identical. To avoid data transfer problems stemming from lettercase of database or table names, you have two options:

  • Use lower_case_table_names=1 on all systems. The main disadvantage with this is that when you use SHOW TABLES or SHOW DATABASES, you don't see the names in their original lettercase.

  • Use lower_case_table_names=0 on Unix and lower_case_table_names=2 on Windows. This preserves the lettercase of database and table names. The disadvantage of this is that you must ensure that your statements always refer to your database and table names with the correct lettercase on Windows. If you transfer your statements to Unix, where lettercase is significant, they do not work if the lettercase is incorrect.

    Exception: If you are using InnoDB tables, you should set lower_case_table_names to 1 on all platforms to force names to be converted to lowercase.

Note that if you plan to set the lower_case_table_names system variable to 1 on Unix, you must first convert your old database and table names to lowercase before restarting mysqld with the new variable setting.

9.3. User-Defined Variables

You can store a value in a user-defined variable and then refer to it later. This enables you to pass values from one statement to another. User-defined variables are connection-specific. That is, a user variable defined by one client cannot be seen or used by other clients. All variables for a given client connection are automatically freed when that client exits.

User variables are written as @var_name, where the variable name var_name may consist of alphanumeric characters from the current character set, ‘.’, ‘_’, and ‘$’. The default character set is latin1 (cp1252 West European). This may be changed with the --default-character-set option to mysqld. See Section 5.11.1, “The Character Set Used for Data and Sorting”. A user variable name can contain other characters if you quote it as a string or identifier (for example, @'my-var', @"my-var", or @`my-var`).

Note: User variable names are case sensitive before MySQL 5.0 and not case sensitive in MySQL 5.0 and up.

One way to set a user-defined variable is by issuing a SET statement:

SET @var_name = expr [, @var_name = expr] ...

For SET, either = or := can be used as the assignment operator. The expr assigned to each variable can evaluate to an integer, real, string, or NULL value.

You can also assign a value to a user variable in statements other than SET. In this case, the assignment operator must be := and not = because = is treated as a comparison operator in non-SET statements:

mysql> SET @t1=0, @t2=0, @t3=0;
mysql> SELECT @t1:=(@t2:=1)+@t3:=4,@t1,@t2,@t3;
| @t1:=(@t2:=1)+@t3:=4 | @t1  | @t2  | @t3  |
|                    5 |    5 |    1 |    4 |

User variables may be used in contexts where expressions are allowed. This does not currently include contexts that explicitly require a literal value, such as in the LIMIT clause of a SELECT statement, or the IGNORE N LINES clause of a LOAD DATA statement.

If a user variable is assigned a string value, it has the same character set and collation as the string. The coercibility of user variables is implicit as of MySQL 5.0.3. (This is the same coercibility as for table column values.)

Note: In a SELECT statement, each expression is evaluated only when sent to the client. This means that in a HAVING, GROUP BY, or ORDER BY clause, you cannot refer to an expression that involves variables that are set in the SELECT list. For example, the following statement does not work as expected:

mysql> SELECT (@aa:=id) AS a, (@aa+3) AS b FROM tbl_name HAVING b=5;

The reference to b in the HAVING clause refers to an alias for an expression in the SELECT list that uses @aa. This does not work as expected: @aa contains the value of id from the previous selected row, not from the current row.

The general rule is to never assign a value to a user variable in one part of a statement and use the same variable in some other part the same statement. You might get the results you expect, but this is not guaranteed.

Another issue with setting a variable and using it in the same statement is that the default result type of a variable is based on the type of the variable at the start of the statement. The following example illustrates this:

mysql> SET @a='test';
mysql> SELECT @a,(@a:=20) FROM tbl_name;

For this SELECT statement, MySQL reports to the client that column one is a string and converts all accesses of @a to strings, even though @a is set to a number for the second row. After the SELECT statement executes, @a is regarded as a number for the next statement.

To avoid problems with this behavior, either do not set and use the same variable within a single statement, or else set the variable to 0, 0.0, or '' to define its type before you use it.

If you refer to a variable that has not been initialized, it has a value of NULL and a type of string.

9.4. Comment Syntax

MySQL Server supports three comment styles:

  • From a ‘#’ character to the end of the line.

  • From a ‘-- ’ sequence to the end of the line. In MySQL, the ‘-- ’ (double-dash) comment style requires the second dash to be followed by at least one whitespace or control character (such as a space, tab, newline, and so on). This syntax differs slightly from standard SQL comment syntax, as discussed in Section, “'--' as the Start of a Comment”.

  • From a /* sequence to the following */ sequence, as in the C programming language. This syntax allows a comment to extend over multiple lines because the beginning and closing sequences need not be on the same line.

The following example demonstrates all three comment styles:

mysql> SELECT 1+1;     # This comment continues to the end of line
mysql> SELECT 1+1;     -- This comment continues to the end of line
mysql> SELECT 1 /* this is an in-line comment */ + 1;
mysql> SELECT 1+
this is a
multiple-line comment

MySQL Server supports some variants of C-style comments. These enable you to write code that includes MySQL extensions, but is still portable, by using comments of the following form:

/*! MySQL-specific code */

In this case, MySQL Server parses and executes the code within the comment as it would any other SQL statement, but other SQL servers will ignore the extensions. For example, MySQL Server recognizes the STRAIGHT_JOIN keyword in the following statement, but other servers will not:

SELECT /*! STRAIGHT_JOIN */ col1 FROM table1,table2 WHERE ...

If you add a version number after the ‘!’ character, the syntax within the comment is executed only if the MySQL version is greater than or equal to the specified version number. The TEMPORARY keyword in the following comment is executed only by servers from MySQL 3.23.02 or higher:


The comment syntax just described applies to how the mysqld server parses SQL statements. The mysql client program also performs some parsing of statements before sending them to the server. (It does this to determine statement boundaries within a multiple-statement input line.)

9.5. Treatment of Reserved Words in MySQL

A common problem stems from trying to use an identifier such as a table or column name that is a reserved word such as SELECT or the name of a built-in MySQL data type or function such as TIMESTAMP or GROUP.

If an identifier is a reserved word, you must quote it as described in Section 9.2, “Database, Table, Index, Column, and Alias Names”. Exception: A word that follows a period in a qualified name must be an identifier, so it is not necessary to quote it, even if it is a reserved word.

You are permitted to use function names as identifiers. For example, ABS is acceptable as a column name. However, by default, no whitespace is allowed in function invocations between the function name and the following ‘(’ character. This requirement allows a function call to be distinguished from a reference to a column name.

A side effect of this behavior is that omitting a space in some contexts causes an identifier to be interpreted as a function name. For example, this statement is legal:

mysql> CREATE TABLE abs (val INT);

But omitting the space after abs causes a syntax error because the statement then appears to invoke the ABS() function:

mysql> CREATE TABLE abs(val INT);
ERROR 1064 (42000) at line 2: You have an error in your SQL
syntax ... near 'abs(val INT)'

If the IGNORE_SPACE SQL mode is enabled, the server allows function invocations to have whitespace between a function name and the following ‘(’ character. This causes function names to be treated as reserved words. As a result, identifiers that are the same as function names must be quoted as described in Section 9.2, “Database, Table, Index, Column, and Alias Names”. The server SQL mode is controlled as described in Section 5.2.5, “The Server SQL Mode”.

The words in the following table are explicitly reserved in MySQL 5.0. At some point, you might update to a higher version, so it's a good idea to have a look at future reserved words, too. You can find these in the manuals that cover higher versions of MySQL. Most of the words in the table are forbidden by standard SQL as column or table names (for example, GROUP). A few are reserved because MySQL needs them and (currently) uses a yacc parser. A reserved word can be used as an identifier if you quote it.



MySQL allows some keywords to be used as unquoted identifiers because many people previously used them. Examples are those in the following list:


  • BIT

  • DATE

  • ENUM

  • NO

  • TEXT

  • TIME