indicator -- display application specific alarms and/or the ``working'' indicator


   indicator [-b [n]] [-c column] [-l length] [-o] [-w] [string ...]


The indicator function displays application specific alarms or the ``Working'' indicator, or both, on the FMLI banner line. The argument string is a string to be displayed on the banner line, and should always be the last argument given. Note that string is not automatically cleared from the banner line.

The following options are available:

-b n
The -b option rings the terminal bell n times, where n is an integer from 1 to 10. The default value is 1. If the terminal has no bell, the screen is flashed instead, if possible.

-c column
The -c option defines the column of the banner line at which to start the indicator string. The argument column must be an integer from 0 to DISPLAYW-1. If the -c option is not used, column defaults to 0.

-l length
The -l option defines the maximum length of the string displayed. If string is longer than length characters, it will be truncated. The argument length must be an integer from 1 to DISPLAYW. If the -l option is not used, length defaults to DISPLAYW. NOTE: if string doesn't fit it will be truncated.

The -o option causes indicator to duplicate its output to stdout.

The -w option turns on the working indicator.


When the value entered in a form field is invalid, the following use of indicator will ring the bell three times and display the word WRONG starting at column 1 of the banner line.
   invalidmsg=`indicator -b 3 -c 1 "WRONG"`

To clear the indicator after telling the user the entry is wrong:

   invalidmsg=`indicator -b 9 -c 1 "WRONG"; sleep(3);
   	indicator -c 1 "     "`

In this example the value of invalidmsg (in this case the default value Input is not valid), still appears on the FMLI message line.

© 2004 The SCO Group, Inc. All rights reserved.
UnixWare 7 Release 7.1.4 - 25 April 2004