DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH PRINT BOOK
 

kbdcomp(1M)


kbdcomp -- compile code set and keyboard map tables

Synopsis

kbdcomp [-vrR] [-o outfile] [infile]

Description

The kbdcomp command compiles tables for use with the iconv utility and with the kbd (see kbd(7)) STREAMS module, a programmable string-translation module. Both the iconv utility and the kbd STREAMS module have two separate functions, each of which may be used alone or in combination.

The lookup function is that of performing simple substitution of bytes in an input stream. This function is based on a simple 256-entry lookup table (as there are 256 possible bit combinations for a byte). As input is received, each byte is looked up in the translation table, and the table value for that byte is substituted in place of the original byte. The process is quick, and can be performed on each STREAMS message with no message copying or duplication.

The second function, mapping, provides searching for occurrences of specified strings of bytes (or individual bytes) in an input stream, and substituting other strings (or bytes) for them as they are recognized. There are three kinds of mapping that are differentiated by the relationship between the number of bytes in the input and the number of bytes in the output. One to many mapping is substituting many bytes for a given byte in the input. Many to one mapping is substituting many bytes for a given input byte. Many to many mapping includes the other two types as a proper subset, but also includes substitution of many bytes in the input with many bytes of output. Both iconv and kbd can perform all three types of mapping. The lookup function (that is, one to one mapping) is a common special case useful enough to be included separately. By using combinations of both lookup and mapping instead of either one alone, a larger class of input translation and conversion problems can be solved.

During operation, processing occurs in two major passes: the lookup table pass always precedes string mapping. The string mapping procedure is non-recursive for a given table and there is no feedback mechanism (that is, input is scanned in order received and output is not re-scanned for occurrences of recognizable input strings). As an example of mapping, suppose you want to translate all occurrences of the string ``this'' in an input stream into the string ``there''. Both utility and module recognize and buffer occurrences of the string ``th'' (as each byte is received); if the following character is ``i'', it will also be buffered, but if ``x'' is then received, a mismatch is recognized and no translation occurs. Assuming ``thi'' has been buffered, if the next character seen is ``s'', a match is recognized, the buffer containing ``this'' is discarded, and the string ``there'' replaces it.

Both input and output strings can be of any non-zero length (see below for limitations). Each string to be recognized and translated must be unique, and no complete input string may constitute the leading substring of any other (for example, one may not define ``abc'' and ``ab'' simultaneously, but may so define ``abc'', ``abd'', and ``abxy'').

Given a filename (or standard input if no name is supplied), kbdcomp will compile tables into the output file specified by the -o option. If the -o option is not supplied, output is to the file kbd.out.

The -v option causes parsing and verification, that is, no output file is produced. If no error messages are printed, then the input file is syntactically correct. The -r option causes the compiler to check for and report on byte values that cannot be generated in a table (see the description below). The option -R is equivalent to the option -r but it tries to print printable characters as themselves rather than in octal format.

Input language

Source files for kbdcomp are a series of table declarations. Within each table declaration there are a number of definitions and functions. A table declaration can be the map, link, or extern form:
   map type ( name ) { expressions }
   

link ( string )

extern ( string )

First the map form is described, then the link and extern forms. The name of a map must be a simple token not containing any colons, commas, quotes, or spaces. (For our purposes, a simple token is a sequence of alphabetic or numeric characters with no embedded punctuation, white space, or special symbols.) The type field is an optional field that may be either of the keywords full or sparse. If omitted, the type defaults to sparse. The effect of this field is described in more detail below. The expressions contained in the map declaration are one of the following forms. Reserved keywords are printed in constant width, variables in italics:
   keylist ( string string )
   define ( word  value )
   word ( extension  result )
   string ( word word )
   strlist ( string string )
   error ( string )
   timed
The keylist form is for defining lookup table entries while the remaining forms are the separate string functions.

The definition form (define) allows a mnemonic word (the first argument) to be associated with a string (the second argument). It is useful for replacing complicated sequences (for example, those containing special symbols or control characters) with mnemonic words to facilitate the design and readability of tables.

Using the word form (where word must be a previously defined sequence) in a way similar to a C function call results in the value of word being concatenated with extension; when the combination is recognized, it is mapped to result. The value may be a string of characters or a single byte. The following is an illustration (not intended to be complete):

   map (some_accents) {
   	define(acute '\047')
   	define(grave '`' )
   	acute(a '\341')       # same as string("\047a" "\341")
   	grave(a '\340')
   	# ...et cetera...
   	keylist("zyZY" "yzYZ")
   }
This map defines the single quote and reverse quote keys as dead-keys that when followed by ``a'' produce a character from the ISO 8859-1 code set. It is not necessary for the definition, extension, or result to be a single byte; they can be arbitrary strings.

Strings in definitions and arguments can be entered between double quotes or without the quotes. Byte constants can be entered without quotes or between single quotes. Double quotes are required when a string contains parentheses, spaces, tab characters, or other special symbols. The language makes no distinction between byte constants and string constants; both are treated as null-terminated strings. You can choose to use a one-character string or a byte constant; it is your preference. Most quoting conventions of C are recognized, except that octal constants must be three digits. Octal constants may be used in strings, also. In the example above, the arguments to keylist need not be quoted, since they contain no special symbols. The following example shows where strings must be quoted:

   string(abc "two words")    # literal space
   keylist("[{}]" "(())")     # brackets/parentheses
   define(esc_seq "\033\t(")  # tab and parenthesis
   define(space ' ')          # literal space
   string(abc "keylist")      # keyword used as argument
Comments in files (inside or outside of map declarations) may be entered in the same way as for sh(1); that is, after a ``#'' at the end of a line, or on a line beginning with ``#'', as shown in the above examples.

The keylist form allows single bytes to be mapped to other single bytes; it defines actions that are treated in the lookup table (that is, are performed before mapping). Any byte value that is not explicitly changed by being included in a keylist form will be unchanged; if no keylist forms appear in a map definition, then kbdcomp does not generate a lookup table for the map, and the lookup phase is skipped during module operation. Each byte in the first string argument to keylist is mapped to the byte at the same position in the second string argument. That is, given two strings X and Y as arguments: X(i) maps to Y(i), X(j) maps to Y(j), and so forth. The two arguments must, after evaluation, be found to contain the same number of bytes.

The string form has a function similar to mnemonic forms defined with define and may be used for any type of many to many mapping. The first argument to string is mapped to the second argument (see the comment in the sample map above).

Mappings using both keylist and string or any define forms may be combined: if ``i'' is mapped to ``a'' with a keylist form, and ``a'' is used in the sequence ```a'', then when the user types `i, the sequence ```a'' is seen by the string mapping process (because lookup is done first) and translated accordingly.

The keylist form is intended mainly for use in simple keyboard re-arrangement and case-conversion applications; string is for one to many mapping or for isolated instances of many to many mapping; the define form and words defined with it are intended for more general use in groups of related sequences. Sometimes, while a one to one mapping with keylist may be an obvious choice, the same effect may be achieved with string forms to avoid having a contradictory mapping. For example, suppose one wants, simultaneously, to translate ``x'' into ``y'' and ``y'' into ``abc''. If ``x'' is mapped to ``y'' via a keylist form and ``y'' is mapped to ``abc'' via a string form, then it may be impossible to obtain ``y'' itself (unless defined in another sequence), even though that was not the intention--the intention was to obtain ``y'' whenever the user enters ``x''. This is a contradictory mapping:

   keylist(x y)
   string(y abc)	# "y" itself cannot be generated
There are cases where the intention is that ``y'' not be generated, but most often the intention is to generate it. This problem (a common one in code set mapping) can be solved by using a string form to map ``x'' to ``y'' initially rather than using a keylist form. This allows both ``y'' and ``abc'' to be generated:
   string(x y)
   string(y abc)
Entering a large number of one to one mappings with string can be somewhat tedious. To make things easier, the strlist form is provided. The two string arguments to strlist are interpreted similar to arguments to the keylist form (that is, they are one to one mappings), except that they are processed as string mappings rather than with the lookup table. In the following example, the first three string definitions can be reduced to the strlist form that follows:
   string(a b)

string(c d)
string(e f)

strlist(ace bdf)

It is important to recognize the difference between string and strlist. With string, the two arguments are a single mapping definition (that can be of any type) whereas with strlist, one or more one to one string mappings are defined simultaneously. A set of mappings defined with a combination of string and strlist do not exhibit the same type of incompatibility described above between keylist and string.

Some further aspects of module processing can now be presented. When a partial match in an input sequence is detected during string processing, it is buffered. If at some point the match no longer succeeds, the first byte of the matched buffer is normally sent to the neighboring module. The rest of the input is left in the buffer and scanned again to see if it matches the beginning of another sequence. The error entry allows you to send a string (or byte) constant (called a fallback character) instead of the byte that began the previous sequence; this is particularly useful in code set mapping and conversion applications where the character that failed to be translated might be one that does not occur or has some other meaning in the target code set. The following (somewhat contrived) example illustrates use of the error form:

   # turn arrow keys into vi commands
   	map (vi_map) {
   		string("\033[A" k) # up
   		string("\033[B" j) # down
   		error("!")
   	}
Given input of the ESC character followed by ``[A'' or ``[B'', a single character (``j'' or ``k'') is generated. If presented with the sequence ``ESC[Q'', the module will produce the sequence ``![Q''. The error string ``!'' replaces ESC because the sequence failed to match when ``Q'' was received. The remaining characters are re-scanned, and neither ``['' nor ``Q'' is found to begin a recognized sequence.

One to one mapping with strings or other defined forms (rather than via a keylist lookup table) is generally done with a linear search operation when looking for bytes that begin sequences. However, if the table is specified as a full table, it is initially indexed rather than searched linearly, and thus processed much more quickly when there are a large number of entries. This should be kept in mind in code set mapping applications where nearly all characters are mapped, and many (or most) are one to one mappings. If only a few characters are mapped with string functions, you must decide whether to trade a small gain in processing speed for the space needed to store the index if a table is made full.

The link form, is used to produce a composite table. A composite table is really a form of linkage that allows several tables to be used together in sequence as if the sequence were a single table. The string argument to link is of the following form:

composite:component_1,component_2, . . . , component_n

The target composite name is followed by a colon, and the ordered component list is comma-separated. If the string argument contains spaces or special characters, it must be quoted. (This string is not interpreted by kbdcomp, but is left intact in the output file; it is interpreted by the module at run time.) When a composite table is used, the effect is similar to pushing more than one instance of the kbd module in the sense that the component tables function sequentially. However, it is done within a single instance of the module. As output is produced by processing with one table in the composite, the data is subsequently processed by the next component and so on until the final result emerges at the end of the sequence. (There is no restriction on the use of any combination of full and sparse tables in a composite.)

Composite tables are useful for simplifying complex mappings by modularizing the processing and for increasing the re-usability of tables for different mapping applications. Tables primarily implementing code set mappings can be linked to other tables primarily implementing compose- or dead-key sequences. With a single table implementing a common code set mapping, several different tables implementing combinations of code set mapping and compose-key layouts may be built. A typical configuration might use one table for mapping from an external to internal code set, then use one or more separate tables working in the internal code set to provide compose- or dead-key functionality, as in the following example. One table, 646Sp-8859 maps from an ISO 646 variant (Spanish) external code set to ISO 8859-1; this is combined with two other tables respectively implementing 8859-1 by compose-sequences, and by dead-key sequences:

   link("composed:646Sp-8859,8859-1-cmp")
   	link("deadkey:646Sp-8859,8859-1-dk")
Composite tables can also be built while the module is running from the kbdload command line; details are in the kbdload(1M) manual page. The component tables are linked and processed in the given order (left-to-right). Because the link argument is actually parsed at run time by kbd module, it is not an error to refer to tables that are not contained in the file currently being compiled. An error will be generated when the file is loaded if any component of a link is not present in memory at that time.

The extern form can be used to declare an external function managed by the alp module. External functions are managed in a list by that module, and are available for use as if they were simple tables in kbd. External functions are not downloaded, but are resident in the kernel and merely accessed by the kbd module (see alp(7) for more information). Such functions also can be declared dynamically when required (see kbdload(1M)).

The directive timed may appear any place within a map declaration. If used, it causes the table within which it is defined to be interpreted in timeout mode. In this mode, string mappings are considered not to match if more than a specified amount of time elapses after receipt of the first byte of a sequence without its being fully received and mapped. For example, suppose that ``abc'' is to be mapped to ``xyz'' and the timeout value is 30; if the user types ab and then waits for longer than 30 time units before typing c, the entire sequence will not be translated. Then the sequence is treated as any other mismatch would be: ``a'' is passed to the neighboring module, and ``b'' is checked to see if it begins a sequence. The timer is reset when a mismatch occurs, so that if ``bc'' is defined and ``c'' has just been received, it will be mapped as expected. The default timeout is typically 1/5 to 1/3 of a second (see kbd(7) for details).

Timeout mode is generally useful in cases where terminal function keys are being interpreted, to distinguish between a string typed by the user and a function key string sent by the terminal; it is not intended for use with batch applications such as the iconv command (see iconv(1)), nor generally in pipelines (see pipe(2)). In a composite table, some components may be timed and some not, making the mode useful for combinations of code set mapping and function key mapping.

Timing depends on several factors, including terminal baud-rate, system load, and the user's typing speed. If the timeout value is too long, then typed sequences that happen to be the same as function keys will be erroneously mapped; if the value is too short, then function keys may be missed under a heavy system load or with low speed devices. See kbdset(1) for information on how to change the timeout value, and kbd(7) for information on how an administrator may change the default timeout value. This directive should never be used in tables that implement code set mapping, as it makes the results unpredictable. Long timeouts, on the order of seconds, may be useful in some contexts.

Building and debugging

Users who intend to build their own tables may study the source tables supplied with the distribution in the directory /usr/lib/kbd.

If characters other than alphanumerics are to be used, quoted strings are preferred to unquoted strings; quotation is required for some characters, as mentioned above. Map names and the first arguments of define should be alphanumeric tokens.

The report generated by the -r option may be useful for debugging complex tables. The report (produced on standard error) consists of two octal lists. One list contains byte values that cannot be generated from the lookup table (if keylist forms are used). The other list contains byte values that cannot be generated in any way, that is, values that are neither parts of ``result text'' (products of string mappings) nor generated by the lookup table (if there is one), but are used in other sequences. The report does not exhaustively list unreachable paths, but may show whether they exist and help locate them.

Output files

The files produced by kbdcomp begin with a header. The magic string is ``kbd!map'' with a version number. This header is immediately followed by one or more tables. The lines below can be added to the /etc/magic file for the file(1) command to recognize kbd files.
   0       string          kbd!map         kbd map file
   >8      byte            >0              Ver %d:
   >10     short           >0              with %d table(s)

Limitations

The maximum length for input strings is 128 bytes, and 256 bytes for output strings. The total amount of space consumed by a single table is limited to about 65,000 bytes. Versions are incompatible; object tables are machine-dependent in their byte order and structure size. Thus, while source files are portable, the output of kbdcomp is not. This implies that when using remote devices across a network between heterogeneous machines, tables must be loaded on the machine where the module is actually pushed (that is, the remote side).

Files


/usr/lib/kbd
directory containing system standard map files.

/usr/lib/kbd/*.map
source for some system map files.

References

alp(7), iconv(1), kbd(7), kbdload(1M), kbdset(1)
© 2004 The SCO Group, Inc. All rights reserved.
UnixWare 7 Release 7.1.4 - 25 April 2004