DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH PRINT BOOK
 
Troubleshooting system-level problems

Resource Manager database corrupted

If the system does not boot and an error message indicates that the resource manager database, /stand/resmgr, is either corrupted or missing, do the following:

  1. Reboot UnixWare press the <Space> bar when the Booting UnixWare... prompt is displayed.

  2. At the boot prompt ([boot]) enter:

    RESMGR=resmgr.sav
    boot

    This loads a backup copy of the resource manager database. You system should then reboot.


NOTE: When the system comes up you may want to invoke the DCU to verify that all device driver parameters are set correctly. A corrupted or missing resource manager database is normally the result of improper changes made when adding/modifying hardware parameters.


Next topic: Controller problems
Previous topic: System hangs repeatedly

© 2004 The SCO Group, Inc. All rights reserved.
UnixWare 7 Release 7.1.4 - 22 April 2004