TCP UTILITY test suite

Synopsis:

auto_util all

Configuration file:

nd-util.cfg

Test suite name:

nd-util

Summary:

Tests ping, mftp, sftp, ftpload, dorecp, and telnet.

Prerequisites:

The /etc/hosts.equiv file must be set up correctly and the ndcert password must be <Enter> for this test suite to work properly.

Media types:

Varies according to features tested.

Init state:

1

Executing machine(s)

master and slave

Execution time:

10 minutes

Number of test cases:

7

Number of invokable scenarios:

7

Configuration variables:

MASTERSLAVE

Set to master on the machine where the driver being tested is installed and slave on the other system.

DEVICE

Set both machines to /dev/net0. Default is /dev/net0.

RCP_ITERATIONS

Number of times the test should be executed. This parameter also sets an upper limit on the size of a file that is copied to the slave machine. The minimum size of the file is 1 KB and the maximum is 2^^(Iterations-1) KB For example, if ITERATIONS is set to 14, files from 1 KB to 8 MB will be copied to the slave machine. If you have enough hard disk space (more than 32 MB free) available on the master and slave machines, we recommend that this test be run with ITERATIONS=16, so that 32 MB files are copied for the test. Default value is 14.

SIZE

Corresponds to the file size for the ftpload test. Default is 100 KB.

REMOTE_MACHINE

On the master machine, enter the full domain name of the slave machine being used for testing; on the slave machine, enter the full domain name of the master machine where the device being tested is installed.

TEST_SCENARIO

Select any of the features listed below. The default is all, to run all features.

pingtest

ping slave machine 10 times and verify response.

mftp

master ftp put 1 MB file, get same file, compare to original.

sftp

slave ftp put 1 MB file, get same file, compare to original.

ftpload

ftp large files simultaneously 4 times on both slave and master machines and compare.

dorcp

slave copy large files simultaneously on both slave and master machines and compare to original.

mtelnet

telnet to other machine, cat a file and compare.

stelnet

Slave machine telnets in, cats a file and compares.