SCO OpenServer 5 MDI driver installation
The SCO OpenServer 5 kernel does not support
so the system must be rebooted
each time you modify the driver.
After the driver has been configured into the kernel,
use the following procedure to modify the driver
and re-install it for more testing:
Modify the driver source code.
Rebuild the driver.
Move your Driver.o file to the
Make any necessary modifications to the
Driver Software Package
Issue the following commands
to link the driver into the kernel
and reboot the system:
© 2005 The SCO Group, Inc. All rights reserved.
OpenServer 6 and UnixWare (SVR5) HDK - June 2005