Configuring the debuggers

To configure either or both debuggers into the SVR5 kernel:

1. Edit the System(DSP/4dsp) file and change the N in the second column to a Y.

2. Issue either or both of the following commands:

      modadmin -l kdb
      modadmin -l scodb
   

   kdb can be configured without scodb but scodb requires that kdb also be configured.

To configure scodb into the SCO OpenServer 5 kernel:

1. Edit the sdevice(F) file and change the N in the second column to a Y.

2. Relink the kernel and reboot the system.

The crash command is available at all times to users with appropriate privleges.