Mouse does not work
First check that your mouse is properly
installed in your system (connected to the right COM port). If it is:
For PS/2 or serial mouse on a EISA system, check the ECU to
verify that your mouse is enabled and that other hardware
controllers are not configured with conflicting hardware
parameter settings (IRQ, memory address range, and so). See your
hardware documentation for details on using the ECU.
On an ISA system, check your BIOS setup.
Administrative commands fail consistently
Kernel build fails
© 2004 The SCO Group, Inc. All rights reserved.
UnixWare 7 Release 7.1.4 - 22 April 2004