DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH PRINT BOOK
 

gdc(1Mtcp)


gdc -- operational user interface for gated

Synopsis

gdc [ -nq ] [ -t seconds ] command

Description

gdc provides a user-oriented interface for the operation of the gated(1Mtcp) routing daemon. It provides support for starting and stopping the daemon, for the delivery of signals to manipulate the daemon when it is operating, for the maintenance and syntax checking of configuration files, and for the production and removal of state dumps and core dumps. gdc can reliably determine gated's running state and can produce a reliable exit status when errors occur, making it advantageous for use in shell scripts which manipulate gated. Commands executed using gdc and, optionally, error messages produced by the execution of those commands, are logged via the same syslogd(1M) facility which gated itself uses, providing an audit trail of operations performed on the daemon.

The command-line options are:


-n
Run without changing the kernel forwarding table. Used for testing and when operating as a route server which does not perform forwarding.

-q
Run quietly. With this option, informational messages which are normally printed to the standard output are suppressed and error messages are logged via syslogd(1M) instead of being printed to the standard error output. This is often convenient when running gdc from a shell script.

-t
Specifies the time in seconds which gdc will spend waiting for gated to complete certain operations, in particular at termination and startup. By default this value is set to 10 seconds.
The following commands cause signals to be delivered to gated for various purposes:

COREDUMP
Send an abort signal to gated, causing it to terminate with a core dump.

dump
Signal gated to dump its current state into the file /var/tmp/gated_dump.

interface
Signal gated to recheck the interface configuration. gated normally does this periodically in any event, but the facility can be used to force the daemon to check interface status immediately when changes are known to have occurred.

KILL
Cause gated to terminate ungracefully. Normally useful when the daemon has hung.

reconfig
Signal gated to reread its configuration file, reconfiguring its current state as appropriate.

term
Signal gated to terminate after shutting down all operating routing protocols gracefully. Executing this command a second time should cause gated to terminate even if some protocols have not yet fully shut down.

toggletrace
If gated is currently tracing to a file, cause tracing to be suspended and the trace file to be closed. If gated tracing is currently suspended, cause the trace file to be reopened and tracing initiated. This is useful for moving trace files.
By default, gated obtains its configuration from a file normally named /etc/inet/gated.conf. The gdc program also maintains several other versions of the configuration file, in particular named:

/etc/inet/gated.conf+
The new configuration file. When gdc is requested to install a new configuration file, /etc/inet/gated.conf+ is renamed /etc/inet/gated.conf.

/etc/inet/gated.conf-
The old configuration file. When gdc is requested to install a new configuration file, the previous /etc/inet/gated.conf is renamed to /etc/inet/gated.conf-.

/etc/inet/gated.conf--
The really old configuration file. gdc retains the previous old configuration file under this name.
The following commands perform operations related to configuration files:

checkconf
Check /etc/inet/gated.conf for syntax errors. This is usefully done after changes to the configuration file but before sending a reconfig signal to the currently running gated, to ensure that there are no errors in the configuration which would cause the running gated to terminate on reconfiguration. When this command is used, gdc issues an informational message indicating whether there were parse errors or not, and if so saves the error output in a file for inspection.

checknew
Like checkconf except that the new configuration file, /etc/inet/gated.conf+, is checked instead.

newconf
Move the /etc/inet/gated.conf+ file into place as /etc/inet/gated.conf, retaining the older versions of the file as described above. gdc will decline to do anything when given this command if the new configuration file doesn't exist or otherwise looks suspect.

backout
Rotate the configuration files in the newer direction, in effect moving the old configuration file to /etc/inet/gated.conf. The command will decline to perform the operation if /etc/inet/gated.conf- doesn't exist or is zero length, or if the operation would delete an existing, non-zero length /etc/inet/gated.conf+ file.

BACKOUT
Perform a backout operation even if /etc/inet/gated.conf+ exists and is of non-zero length.

modeconf
Set all configuration files to mode 664, owner root, group gdmaint. This allows a trusted non-root user to modify the configuration files.

createconf
If /etc/inet/gated.conf+ does not exist, create a zero length file with the file mode set to 664, owner root, group gdmaint. This allows a trusted non-root user to install a new configuration file.
The following commands provide support for starting and stopping gated and for determining its running state:

running
Determine if gated is currently running. This is done by checking to see if gated has a lock on the file containing its pid, if the pid in the file is sensible and if there is a running process with that pid. Exits with zero status if gated is running, non-zero otherwise.

start
Start gated. The command returns an error if gated is already running. Otherwise, it executes the gated binary and waits for up to the delay interval (10 seconds by default, as set with the -t option otherwise) until the newly started process obtains a lock on the pid file. A non-zero exit status is returned if an error is detected while executing the binary, or if a lock is not obtained on the pid file within the specified wait time.

stop
Stop gated, gracefully if possible, ungracefully if not. The command returns an error (with non-zero exit status) if gated is not currently running. Otherwise, it sends a terminate signal to gated and waits for up to the delay interval (10 seconds by default, as specified with the -t option otherwise) for the process to exit. Should gated fail to exit within the delay interval, it is then signaled again with a second terminate signal. Should it fail to exit by the end of the second delay interval, it is signaled for a third time with a kill signal. This should force immediate termination unless something is very broken. The command terminates with zero exit status when it detects that gated has terminated, non-zero otherwise.

restart
If gated is running, it is terminated via the same procedure as is used for the stop command above. When the previous gated terminates, or if it was not running prior to command execution, a new gated process is executed using the procedures described for the start command above. A non-zero exit status is returned if any step in this procedure appears to have failed.
The following commands allow the removal of files created by the execution of some of the commands above:

rmcore
Removes any existing gated core dump file.

rmdump
Removes any existing gated state dump file.

rmparse
Removes the parse error file generated when a checkconf or checknew command is executed and syntax errors are encountered in the configuration file being checked.

Files


/usr/sbin/in.gated
gated binary

/etc/inet/gated.conf
current gated configuration file

/etc/inet/gated.conf+
newer configuration file

/etc/inet/gated.conf-
older configuration file

/etc/inet/gated.conf--
much older configuration file

/etc/inet/gated.pid
where gated stores its pid

/var/tmp/gated_dump
gated's state dump file

/var/tmp/%s_parse
where configuration file parse errors go

/var/tmp
where gated drops its core file

References

gated(1Mtcp), gated.conf(4tcp), ripquery(1Mtcp), syslogd(1M)
© 2004 The SCO Group, Inc. All rights reserved.
UnixWare 7 Release 7.1.4 - 25 April 2004