/usr/man/man.1/ntlm_auth.1(/usr/man/man.1/ntlm_auth.1)
NTLM_AUTH(1) USER COMMANDS NTLM_AUTH(1)
NAME
ntlm_auth - tool to allow external access to Winbind's NTLM
authentication function
SYNOPSIS
ntlm_auth [-d debuglevel] [-l logdir] [-s <smb config file>]
DESCRIPTION
This tool is part of the samba(7) suite.
ntlm_auth is a helper utility that authenticates users using
NT/LM authentication. It returns 0 if the users is authenti-
cated successfully and 1 if access was denied. ntlm_auth
uses winbind to access the user and authentication data for
a domain. This utility is only indended to be used by other
programs (currently Squid and mod_ntlm_winbind)
OPERATIONAL REQUIREMENTS
The winbindd(8) daemon must be operational for many of these
commands to function.
Some of these commands also require access to the directory
winbindd_privileged in $LOCKDIR. This should be done either
by running this command as root or providing group access to
the winbindd_privileged directory. For security reasons,
this directory should not be world-accessable.
OPTIONS
--helper-protocol=PROTO
Operate as a stdio-based helper. Valid helper protocols
are:
squid-2.4-basic
Server-side helper for use with Squid 2.4's basic
(plaintext) authentication.
squid-2.5-basic
Server-side helper for use with Squid 2.5's basic
(plaintext) authentication.
squid-2.5-ntlmssp
Server-side helper for use with Squid 2.5's NTLMSSP
authentication.
Requires access to the directory winbindd_privileged
in $LOCKDIR. The protocol used is described here:
http://devel.squid-
cache.org/ntlm/squid_helper_protocol.html. This proto-
col has been extended to allow the NTLMSSP Negotiate
packet to be included as an argument to the YR com-
mand. (Thus avoiding loss of information in the proto-
col exchange).
Last change: 1
NTLM_AUTH(1) USER COMMANDS NTLM_AUTH(1)
ntlmssp-client-1
Client-side helper for use with arbitary external pro-
grams that may wish to use Samba's NTLMSSP authentica-
tion knowlege.
This helper is a client, and as such may be run by any
user. The protocol used is effectivly the reverse of
the previous protocol. A YR command (without any argu-
ments) starts the authentication exchange.
gss-spnego
Server-side helper that implements GSS-SPNEGO. This
uses a protocol that is almost the same as squid-2.5-
ntlmssp, but has some subtle differences that are
undocumented outside the source at this stage.
Requires access to the directory winbindd_privileged
in $LOCKDIR.
gss-spnego-client
Client-side helper that implements GSS-SPNEGO. This
also uses a protocol similar to the above helpers, but
is currently undocumented.
ntlm-server-1
Server-side helper protocol, intended for use by a
RADIUS server or the 'winbind' plugin for pppd, for
the provision of MSCHAP and MSCHAPv2 authentication.
This protocol consists of lines in for form: Parame-
ter: value and Paramter:: Base64-encode value. The
presence of a single period indicates that one side
has finished supplying data to the other. (Which in
turn could cause the helper to authenticate the user).
Curently implemented parameters from the external pro-
gram to the helper are:
Username
The username, expected to be in Samba's unix char-
set.
Example 1. Username: bob
Example 2. Username:: Ym9i
Username
The user's domain, expected to be in Samba's unix
charset.
Example 3. Domain: WORKGROUP
Last change: 2
NTLM_AUTH(1) USER COMMANDS NTLM_AUTH(1)
Example 4. Domain:: V09SS0dST1VQ
Full-Username
The fully qualified username, expected to be in
Samba's
and qualified with the winbind separator.
Example 5. Full-Username: WORKGROUPb
Example 6. Full-Username:: V09SS0dST1VQYm9i
LANMAN-Challenge
The 8 byte LANMAN Challenge value, generated ran-
domly by the server, or (in cases such as MSCHAPv2)
generated in some way by both the server and the
client.
Example 7. LANMAN-Challege: 0102030405060708
LANMAN-Response
The 24 byte LANMAN Response value, calculated from
the user's password and the supplied LANMAN Chal-
lenge. Typically, this is provided over the network
by a client wishing to authenticate.
Example 8. LANMAN-Response:
0102030405060708090A0B0C0D0E0F101112131415161718
NT-Response
The >= 24 byte NT Response calculated from the
user's password and the supplied LANMAN Challenge.
Typically, this is provided over the network by a
client wishing to authenticate.
Example 9. NT-Response:
0102030405060708090A0B0C0D0E0F101112131415161718
Password
The user's password. This would be provided by a
network client, if the helper is being used in a
legacy situation that exposes plaintext passwords
in this way.
Example 10. Password: samba2
Example 11. Password:: c2FtYmEy
Request-User-Session-Key
Apon sucessful authenticaiton, return the user ses-
sion key associated with the login.
Last change: 3
NTLM_AUTH(1) USER COMMANDS NTLM_AUTH(1)
Example 12. Request-User-Session-Key: Yes
Request-LanMan-Session-Key
Apon sucessful authenticaiton, return the LANMAN
session key associated with the login.
Example 13. Request-LanMan-Session-Key: Yes
Warning Implementors should take care to base64
encode any data (such as
usernames/passwords) that may contain malicous user
data, such as a newline. They may also
need to decode strings from the helper,
which likewise may have been base64 encoded.
--username=USERNAME
Specify username of user to authenticate
--domain=DOMAIN
Specify domain of user to authenticate
--workstation=WORKSTATION
Specify the workstation the user authenticated from
--challenge=STRING
NTLM challenge (in HEXADECIMAL)
--lm-response=RESPONSE
LM Response to the challenge (in HEXADECIMAL)
--nt-response=RESPONSE
NT or NTLMv2 Response to the challenge (in HEXADECIMAL)
--password=PASSWORD
User's plaintext password
If not specified on the command line, this is prompted
for when required.
For the NTLMSSP based server roles, this paramter speci-
fies the expected password, allowing testing without win-
bindd operational.
--request-lm-key
Retreive LM session key
--request-nt-key
Request NT key
--diagnostics
Perform Diagnostics on the authentication chain. Uses the
password from --password or prompts for one.
Last change: 4
NTLM_AUTH(1) USER COMMANDS NTLM_AUTH(1)
--require-membership-of={SID|Name}
Require that a user be a member of specified group
(either name or SID) for authentication to succeed.
-V Prints the program version number.
-s <configuration file>
The file specified contains the configuration details
required by the server. The information in this file
includes server-specific information such as what
printcap file to use, as well as descriptions of all the
services that the server is to provide. See smb.conf for
more information. The default configuration file name is
determined at compile time.
-d|--debuglevel=level
level is an integer from 0 to 10. The default value if
this parameter is not specified is zero.
The higher this value, the more detail will be logged to
the log files about the activities of the server. At
level 0, only critical errors and serious warnings will
be logged. Level 1 is a reasonable level for day-to-day
running - it generates a small amount of information
about operations carried out.
Levels above 1 will generate considerable amounts of log
data, and should only be used when investigating a prob-
lem. Levels above 3 are designed for use only by develop-
ers and generate HUGE amounts of log data, most of which
is extremely cryptic.
Note that specifying this parameter here will override
the
parameter in the smb.conf file.
-l|--logfile=logdirectory
Base directory name for log/debug files. The extension
".progname" will be appended (e.g. log.smbclient,
log.smbd, etc...). The log file is never removed by the
client.
-h|--help
Print a summary of command line options.
EXAMPLE SETUP
To setup ntlm_auth for use by squid 2.5, with both basic and
NTLMSSP authentication, the following should be placed in
the squid.conf file.
Last change: 5
NTLM_AUTH(1) USER COMMANDS NTLM_AUTH(1)
auth_param ntlm program ntlm_auth --helper-protocol=squid-2.5-ntlmssp
auth_param basic program ntlm_auth --helper-protocol=squid-2.5-basic
auth_param basic children 5
auth_param basic realm Squid proxy-caching web server
auth_param basic credentialsttl 2 hours
Note
This example assumes that ntlm_auth has been installed into
your path, and that the group permissions on
winbindd_privileged are as described above.
To setup ntlm_auth for use by squid 2.5 with group limita-
tion in addition to the above example, the following should
be added to the squid.conf file.
auth_param ntlm program ntlm_auth --helper-protocol=squid-2.5-ntlmssp --require-membership-of='WORKGROUP
auth_param basic program ntlm_auth --helper-protocol=squid-2.5-basic --require-membership-of='WORKGROUP
TROUBLESHOOTING
If you're experiencing problems with authenticating Internet
Explorer running under MS Windows 9X or Millenium Edition
against ntlm_auth's NTLMSSP authentication helper (--
helper-protocol=squid-2.5-ntlmssp), then please read the
Microsoft Knowledge Base article #239869 and follow instruc-
tions described there.
VERSION
This man page is correct for version 3.0 of the Samba suite.
AUTHOR
The original Samba software and related utilities were
created by Andrew Tridgell. Samba is now developed by the
Samba Team as an Open Source project similar to the way the
Linux kernel is developed.
The ntlm_auth manpage was written by Jelmer Vernooij and
Andrew Bartlett.
Last change: 6
Man(1) output converted with
man2html